When Breeze 2 is fully charged, the LED light will flash both of blue and orange color 20 times and then remain off.
If using the 5V/1A wall adaptor, you need to charge Breeze 2 for about 3 hours.
The TPD version has 2ml capacity, the regular version has 3ml capacity.
1) Pull and remove the drip tip section. 2) Unscrew and pull out the chimney unit. 3) Detach the coil from the airflow control ring and replace it with new one. 4) Screw the chimney unit back to the pod system. 5) Replace the drip tip section.
When the charge capacity is above 3.8V, the indicator light will be blue and orange. When the charge is between 3.5-3.8V, the light will be blue only. When the charge drop below 3.5V, the light will become orange to remind you it’s time to charge it.
No, it will only fire when you press the fire button.
The 0.6ohm coil of Breeze 2 is exactly the same as 0.6ohm of Breeze 1st generation, so no problem with interchangeability. For 1.0ohm coil of Breeze 2, it’s interchangeable with 1.2ohm coil of Breeze 1st generation because they have same structure, however, to ensure a good vaping performance, we don’t suggest interchanging.
First of all remove the mouth piece, then you can rotate the airflow control ring on top of Breeze 2 pod.
Squeeze the pod release buttons on each side of the device to release and remove the pod Invert the pod and lift the silicone seal. Place the filling bottle/dropper into the pod filling hole. Squeeze the bottle/dropper bulb to add your e juice into pod system Replace the silicone seal firmly Re-insert the pod into […]