Yes it has. 1)Automatic cutoff: The continuous fire time is 10 seconds ,after 10 seconds of continuous firing the mod will stop firing and the LED light under the fire button will flash 10 times. 2)Short circuit protection: When the mod detects a short, the LED light will flash 4 times 3)Over discharge protection: When […]
Click the fire button 5 times rapidly to lock or unlock the device the LED light will flash blue and orange light 3 times to indicate lock or unlock. Note: When you put the mod in your pocket or bag, please remember to lock the mod first.
No, Revvo boost tank can only work with Revvo boost coil.
When the battery level is above 3.8V, the LED light will be blue only, when the battery level is between 3.5V and 3.8V, the light will be a mixed color of blue and orange; the orange light means the battery level is below 3.5V.
With the Aspire Custom Mosfet, the resistance of your coil can not be lower than 0.1 Ohm. Any atomizer with above 0.1ohm build can be use on the Feedlink, as it only works in bypass mode, the chip will automatically adjust the power level.
Yes, if it’s a new coil or the coil has become dry for any reason, it’s necessary to invert tank to saturate the coil before vaping.
It is 7ml.
1) Invert the Feedlink mod and unscrew the battery cap. 2) Insert an 18650 battery into the battery compartment with positive end pointing down and negative end pointing up. 3) Screw the battery cap back onto the mod. Note: 1)Please use single 18650 high rate discharge battery(above 35A) 2)Please don’t over tight the battery cap
1) Lightly push in the bottle securing cap at the bottom of the mod. 2) Then twist counter-clockwise direction to remove the securing cap. 3) Insert a new silicone e-juice bottle into the plastic carrier frame, reinsert the frame into the mod then push the knob and twist clockwise direction to secure.
1)Unscrew and remove the glass securing ring from the base hardware. 2)Pull and remove the used glass tube. 3)Insert a new glass tube. 4)Screw the glass securing ring back onto the base hardware.