1) Unscrew and remove the top chamber. 2) Unscrew and remove the mounting screw. 3)Remove the used ARC coil by lifting over the metal pin. 4)Place a new coil over the metal pin, make sure the coil edge is well seated and lined up with the tank. 5) Screw the mounting screw back onto the […]
1) Unscrew and remove the metal cap at the top of the bottle. 2) Add your preferred e-juice into the bottle. 3) Replace metal cap.
The Revvo boost tank is fitted with a bottom feeding squonk pin, so you only need to squeeze the squonk bottle until you can see your e-liquid rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle […]
The Feedlink is not a regulated mod, it is powered by the Aspire Custom Mosfet, Short circuit Protection, Fire Lock and an Led Indicator.
It uses single 18650 battery.
The Revvo Boost tank itself comes in a TPD compliant 2ml version, no requirement for a larger capacity tank when just a squeeze of the squonk bottle will top up your tank, you don’t even have to put it down.
The resistance of the Revvo boost coil is 0.1-0.14ohm, the suggested wattage range is 70-80W.