Yes, you can use Breeze 2 pod standard version and TPD version on the same Breeze 2 mod.
In the Breeze 2, 1.0ohm coil, the coil wire is Kanthal and in the Breeze 2, 0.6ohm coil, the coil wire is SS316l
The Breeze 2 is bypass output, the output wattage will change according to the resistance of the coil and the battery power level, the output wattage range of Breeze 2 is between 9-25W
Users can buy the O-rings and chimney units for the Breeze 2 from the Aspire online store, here is the link for your reference: https://online.aspirecig.com/aspire-breeze-2-accessories-p-297.html
Please check the tutorial video for Aspire Breeze 2
Yes, users can just buy the battery part for Breeze 2 from online store for replacement, then you don’t need to buy the whole kit https://online.aspirecig.com/aspire-breeze-2-battery-unit-p-327.html
Before inserting the pod to the mod, please make sure the clips are fine and in place, not slanted, and while inserting the pod to the mod, please don’t press the side releasing buttons. Furthermore, please don’t pull the pod out of device before the pod is totally released. The best way to avoid breaking […]
Please first make sure the airflow base hardware with the coil screwed to the pod properly, not too tight nor too loose. Before inserting the pod to the mod, please make sure the clips are fine and in their place, not slanted. After filling the tank, please insert the orange e-juice plug to the pod properly
1) Pull and remove the drip tip section. 2) Unscrew and pull out the chimney unit. 3) Detach the coil from the airflow control ring and replace it with new one. 4) Screw the chimney unit back to the pod system. 5) Replace the drip tip section.
Squeeze the pod release buttons on each side of the device to release and remove the pod Invert the pod and lift the silicone seal. Place the filling bottle/dropper into the pod filling hole. Squeeze the bottle/dropper bulb to add your e juice into pod system Replace the silicone seal firmly Re-insert the pod into […]