Charging the device via Micro USB charging port, the maximum current can reach up to 1A, and the recommended charging voltage is 5.0V. When the USB cable is attached, the indicator light will flash red 3 times. While charging, the indicator light will indicate the device’s current charge status: 3.5 volts or less (0-30%) = […]
Yes it does. The K Lite mod comes with all the safety features that Aspire is famous for. Automatic cutoff: The preset continuous fire time is 10 seconds, after 10 seconds of continuous firing, the indicator light will flash pink 10 times and the device will stop firing. Short circuit protection: When the device detects […]
Fill your tank and let it stand for 5 minutes to let the e-liquid saturate into cotton fully. Pressing the fire button 5 times within 2 seconds to turn the device on or off. The indicator light will flash white 3 times to indicate on or off. Inhale with pressing the fire button. When the […]
1.6Ω (3.0-4.2V) (6-11W) 1.8Ω (4.2-5.0V) (9-13W)
When the device is on press the fire button, the LED light will indicate your device’s current charge. When its current charge capacity is above 3.8 volts the indicator light will be blue and red. When the charge is between 3.8 and 3.5 volts the light will be blue only. When the charge drops below […]
1) Pull and remove the drip tip section. 2) Unscrew and pull out the chimney unit. 3) Detach the coil from the airflow control ring and replace it with new one. 4) Screw the chimney unit back to the pod system. 5) Replace the drip tip section.
Squeeze the pod release buttons on each side of the device to release and remove the pod Invert the pod and lift the silicone seal. Place the filling bottle/dropper into the pod filling hole. Squeeze the bottle/dropper bulb to add your e juice into pod system Replace the silicone seal firmly Re-insert the pod into […]