On the Breeze 1.2ohm coil, the coil wire is Kanthal and on the Breeze, a 0.6ohm coil, the coil wire is SS316l
Articles Tagged: breeze
Can I use Breeze 2 1.0ohm coil on Breeze?
You can use Breeze 2 1.0ohm coil on the Breeze, but for better performance, we recommend the use of Breeze 2 1.0ohm coil on Breeze 2, other than on the Breeze.
Can I use normal e-juice with the 1.2ohm Breeze coil or Can I use nicotine salt e-juice with the 0.6ohm coil?
Breeze comes with two resistance coils, one is 0.6ohm coil for normal e-juice, if users want to use nicotine salt or high nicotine level e-juice, we suggest the 1.2ohm coil; We don’t recommend the use of normal e-juice with Breeze 1.2ohm coil or use nicotine salt e-juice with the 0.6ohm coil, as the performance may not be […]
What’s the output wattage of Breeze?
The Breeze is bypass output, the output wattage will change according to different resistance coil and battery level, the output wattage range of Breeze is between 9-25W
How to clean the Breeze?
The glass tube of Breeze is built into the mod, so we cannot remove the glass tube, we also cannot clean the Breeze under water. Sometimes we may want to change another flavor of e-juice while in use, how to clean the Breeze in these circumstances? 1. We can unscrew the chimney unit and the coil, then screw off the coil from the […]
Why does my Breeze auto-fire even though I didn’t press the fire button?
Here are some suggestion to avoid an auto-fire: 1. Never blow directly into the mouthpiece as this could potentially turn on the auto-fire sensor on the device and cause the device to fire by itself. For Breeze devices that have an auto-fire button, if users like to blow directly into the mouthpiece first, and then then vape it will […]
Where can the accessories for Breeze be purchased?
Users can buy the O-rings and chimney unit for Breeze from Aspire online store, here is the link for your reference: https://online.aspirecig.com/aspire-breeze-accessories-p-263.html
Is the glass tube of Breeze replaceable?
The glass tube of Breeze is built into the pod, which is not replaceable.
How to change coil for Breeze 2?
1) Pull and remove the drip tip section. 2) Unscrew and pull out the chimney unit. 3) Detach the coil from the airflow control ring and replace it with new one. 4) Screw the chimney unit back to the pod system. 5) Replace the drip tip section.
How to fill the Breeze 2 with e liquid ?
Squeeze the pod release buttons on each side of the device to release and remove the pod Invert the pod and lift the silicone seal. Place the filling bottle/dropper into the pod filling hole. Squeeze the bottle/dropper bulb to add your e juice into pod system Replace the silicone seal firmly Re-insert the pod into […]