1) Unscrew and remove the top chamber. 2) Unscrew and remove the mounting screw. 3)Remove the used ARC coil by lifting over the metal pin. 4)Place a new coil over the metal pin, make sure the coil edge is well seated and lined up with the tank. 5) Screw the mounting screw back onto the […]
1) Unscrew and remove the metal cap at the top of the bottle. 2) Add your preferred e-juice into the bottle. 3) Replace metal cap.
The Revvo boost tank is fitted with a bottom feeding squonk pin, so you only need to squeeze the squonk bottle until you can see your e-liquid rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle […]
It uses single 18650 battery.
The Revvo Boost tank itself comes in a TPD compliant 2ml version, no requirement for a larger capacity tank when just a squeeze of the squonk bottle will top up your tank, you don’t even have to put it down.
The resistance of the Revvo boost coil is 0.1-0.14ohm, the suggested wattage range is 70-80W.