While charging or when AVP Pro is in use, the LED light will indicate the AVP Pro’s current charge: 3.5 volts or less (0-30%)= red light; 3.5 to 3.8 volts (30-60%)= blue light; 3.8 volts and above (60-100%)=green light.
No, it is not interchangeable.
Press the mode button twice in rapid succession to set the output wattage, the light will flash in different colors 3 times to indicate the output wattage: flashing white is 16W, flashing green is 14W, flashing blue is 12W, flashing red is 10W. Note: If you use 0.65ohm coils, you cannot adjust the wattage because the coil’s resistance is […]
1)Detach the pod from the main body; 2)Invert the pod and use the coil replacement tool to pull out the used coil; 3)Insert firmly a new coil into the chamber; 4)Re-insert the pod into the power unit, the pod will be magnetically drawn back into the device.
Yes. You can adjust the airflow if you slide the airflow valve. Left for a tighter airflow and right for more airflow.
Yes, the AVP Pro is an auto draw device, just inhale from the drip tip and it will auto fire.
1) Pull and remove the pod from the main body; 2) Invert the pod and place the tip of the filling bottle into the pod filling hole; 3) Push down and squeeze the filling bottle to add your preferred e-liquid into the pod system; 4) Re-insert the pod into the power unit, the pod will […]
The capacity is 1200mAh.
The wire of both 1.15ohm standard coil and 0.65ohm mesh coil is made of Kanthal.