CPS means Customizable Power Settings. If you press “+” and “-” buttons simultaneously you will be able to fine-tune your heat ramp-up (power curve). Press up or down buttons to change the wattage. Press the fire button to select time from 1 to 10 seconds. Press up and down buttons simultaneously to exit the Customizable […]
Aspire Deco Kit
Q&A(15)
How do I switch between different modes on the Deco mod?
Press the “+” button and fire button simultaneously to choose the output mode. You can choose between wattage, voltage, bypass, and CPS (C1, C2, C3).
Can I use my cellphone charging cable to charge my Deco Mod?
We recommend you use only the Aspire supplied cable.
What type of charging port does the Deco mod have?
Charge the Deco through the Type-C port, the maximum charging current is 2A.
What is the maximum power output of the Deco mod?
If you use an 18650 battery, the mod can reach up to 80 W, when you use a 21700 battery, the mod can reach up to 100W.
Which battery is compatible with the Deco mod?
Single 18650 or 21700 battery. With an 18650 battery you need to use the battery adaptor that comes with the kit.
Does the Deco Kit have temperature control?
No, it does not have temperature control.
How much does the Deco Kit weigh?
Net weight: 213g.
What is the suggested wattage range for Odan EVO coils?
For the 0.3 ohm mesh coil: 35-45 W; For the 0.18 ohm coil: 60-80 W.
How do I change the EVO coil?
Unscrew the base hardware; Invert the tank, pull and change the used coil with a new one; Screw the base hardware back.