We recommend 65-75W for the 0.5ohm and 60-75W for the 0.15ohm coil.
No, you cannot use 0.5ohm and 0.15ohm Nepho coil under temperature control.
Yes, the drip tip is removable and interchangeable with other 810 drip tips on the market.
1) Unscrew the base hardware 2) Pull out the used coil 3) Replace it with a new one 4) Screw the base hardware back onto the tank.
We suggest the use of double 21700 or18650 battery cells with a discharge rate higher than 20A. With 18650 battery you need to use the battery adaptor that comes with the kit.
Yes, it supports temperature control.
No, the screen of Dynamo has no touch function, you need to adjust the settings by pressing the buttons.
Default setting means bringing all the adjustable settings data and interface to default as original the firmware setting at the beginning, except for the time. First press fire button and up button simultaneously to enter main interface, select “System”, then press the fire button to enter the system interface. Press up or down buttons to […]
First press the fire button and up button simultaneously to enter main interface, press up or down button to select “About”. Press fire button to enter “About” interface, then you can check product name and firmware version.
Yes, it supports firmware upgrades.