Charging the device via Micro USB charging port, the maximum current can reach up to 1A, and the recommended charging voltage is 5.0V. When the USB cable is attached, the indicator light will flash red 3 times. While charging, the indicator light will indicate the device’s current charge status: 3.5 volts or less (0-30%) = […]
Yes it does. The K Lite mod comes with all the safety features that Aspire is famous for. Automatic cutoff: The preset continuous fire time is 10 seconds, after 10 seconds of continuous firing, the indicator light will flash pink 10 times and the device will stop firing. Short circuit protection: When the device detects […]
Fill your tank and let it stand for 5 minutes to let the e-liquid saturate into cotton fully. Pressing the fire button 5 times within 2 seconds to turn the device on or off. The indicator light will flash white 3 times to indicate on or off. Inhale with pressing the fire button. When the […]
Battery type: Built-in LiPo Battery capacity: 900mAh
Press the mode button to adjust the output voltage. The voltage display will turn on for 3 seconds to indicate the value of the corresponding output voltage: 3.0V, 3.5V, 4.0V, 4.5V, 5.0V.
Coil installation of K Lite Kit is as easy as well. 1) Invert the tank, unscrew to disengage the base hardware; 2) Unscrew to remove the used coil and replace with a new one; (For TPD version, push and unscrew to remove the used coil and also push and screw to install a new one); […]
The K Lite tank features very easy top fill. Refill the tank according to below steps(either standard version or TPD version): Unscrew the top hardware and remove it from the tank; Add your preferred e-liquid by pushing the tip of your filling bottle through the filling hole; Put the top hardware back on top of […]
You can use the aspire original BVC coils and Spryte coils with K Lite tank.
It is Nichrome.
1.6Ω (3.0-4.2V) (6-11W) 1.8Ω (4.2-5.0V) (9-13W)