The output power can be adjusted from 1 to 30 watts.
The metal part of the device is made of Zinc alloy.
Quickly press the fire button 3 times to choose the vape mode, the device will display “A MODE”/“ B MODE”/ “AB MODE”. A MODE stands for only automatic draw; B MODE stands for only button trigger; AB MODE stands for both automatic draw and button trigger. Note: For the Danish version, when you set the vape mode, the device will only display “A MODE”/“B MODE”. During “A MODE”, […]
The net weight of Tekno kit is 83g.
The Tekno pod is made of PCTG.
To adjust the output power, just click the wattage adjustment button. The wattage increases by 1W per click. You can only increase the wattage. To reduce the wattage, you need to set the wattage to its maximum value and then click the fire button again to set the value to 1W. Once you set the value to 1W, you can proceed […]
Yes, it is adjustable. The airflow controller is located on the side of the Tekno device.
1) Pull and remove the pod from the device; 2) Invert the pod, pull out the used coil and replace it with a new one; 3) Insert the pod back onto the device. Note: For CRC and Danish versions, the coil is non-replaceable.
Yes, the Tekno is activated either by auto-draw or by pressing the firing button.
1) Pull and remove the pod from the device; 2) Invert the pod, press the spring loaded filling hole to add e-liquid; 3) Insert the pod back onto the device.