AVP-CUBE

Quickly press the fire button twice to set the output wattage. The light will flash three times in different colors to indicate the output wattage: flashing white is 16 W, flashing green is 14 W, flashing blue is 12 W, flashing red is 10 W. Note: The output wattage can only be selected when the resistance of the connected coil […]

Yes. To adjust the airflow, detach the pod and align the airflow channel with each of the four sides of the mod. The white dot indicates where the airflow channel is located. Each side of the mod will activate a different airflow level.

While charging or when AVP-CUBE is in use, the LED light will indicate the AVP-CUBE ’s current charge: less than 3.5 volts(0-30%)= red light; 3.5 to 3.8 volts (30-60%)= blue light; above 3.8 volts (60-100%)=green light.

Detach the pod from the main body; Invert the pod, pull out the used coil and replace it with a new one; Insert the pod back onto the device.

Yes, it is removable and compatible with other 510 drip tips on the market.

No, the AVP-CUBE is activated by pressing the firing button.

 1) Pull and remove the pod from the main body; 2) Invert the pod, lift the silicone seal and add e-liquid through the filling hole; 3) Insert the pod back onto the mod. 

AVP Pro coils.

The LED light will flash red 15 times to indicate that you need to charge the AVP-CUBE.

When the AVP-CUBE is fully charged, the LED will flash green 20 times and then it will automatically turn off.