1) Pull to remove the pod; 2) Pull the used coil out, push and press the new coil into the pod; 3) Put the pod back onto the device.
Pull to remove the pod; Lift the silicone seal and add e-liquid through the filling hole; Press the silicone seal back to the filling hole; Put the pod back on the device.
The LED Light will indicate the battery status: less than 3.5 volts (0-30%) = red light; 3.5 to 3.8 volts (30-60%)=blue light; 3.8 to 4.2 volts (60-100%)=green light.
Charge the Cloudflask S through the Type-C port, the maximum charging current is 2A.
No, the Cloudflask S is button activated.
The clear part of pod is made of PCTG, the drip tip is made of POM.
No, the Cloudflask S is a bypass mode device.
The capacity is 2000 mAh.
No, it is incompatible.
Yes, it is compatible with Cloudflask S device.