We suggest using a wall adapter with an output of 5V/1A.
When the mod is charging, the screen will display the battery charge with an increasing graphic, when the mod is fully charged, the screen will go off.
No, it doesn’t support firmware upgrades.
The resistance range is 0.23-0.28ohm.
55-65W if use it with the Revvo mini tank, if you use the Revvo mini coil with the Revvo tank, the recommended wattage range is 70-80W. This is because the Revvo tank has a greater airflow.
It will work with Revvo mini tank, but to ensure a good vaping experience, we don’t recommend using a Revvo coil with the Revvo mini tank.
Filling this tank is super easy and convenient, the filling hole is inside the tank which can be reached by using a gorilla bottle or just as simply by a glass dropper. 1) Locate your filling bottle/dropper onto the spring loaded filling tube and press it down (only minimal pressure is required). 2) Squeeze the […]
1) Unscrew and remove the top chamber. 2) Unscrew and remove the mounting screw. 3) Remove the used ARC coil by lifting over the filling tube. 4) Place a new coil over the filling tube, make sure the coil edge is lined up with the tank and sits securely. 5) Screw the mounting screw back […]
We suggest that you use an 18650 battery cell, which has a discharge rate higher than 25A.