In both coils, the material of the coil wire is Nichrome
Can I use Nautilus AIO pod standard version (4.5ml) and TPD version(2ml) on the same Nautilus AIO mod?
Yes, you can use Nautilus AIO pod standard version and TPD version on the same Nautilus AIO mod.
Users can use Nautilus BVC 1.8ohm and 1.6ohm coils on the Nautilus AIO, however, only the 1.8ohm coil with green seal gasket and NS mark is appropriate for use with nicotine salts. We suggest using the 1.8ohm coil with NS mark only with Nautilus AIO device. The Nautilus 2, 0.7ohm coil or Nautilus 2S 0.4ohm coil and […]
Here are some suggestion: 1. You can try a longer needle-tip bottle to fill the pod. 2. While using, it will produce oil slick in the pod, before filling, you try can blow through the filling hole first, then fill the pod. 3. Additionally please fill the pod slowly, try not to fill too quickly.
1) Squeeze the pod release buttons on each side of the device to release and remove the pod system. 2) Invert the pod and lift the silicon seal 3) Place the filling bottle/dropper into the pod filling hole. 4)Squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. 5) Replace the […]
When the Nautilus AIO is fully charged the LED will flash blue and orange 20 times then remain off.
It’s interchangeable with 1.6ohm and 1.8ohm regular Nautilus coil, however, only the 1.8ohm coil with green seal gasket and NS mark is appropriate for nicotine salts. We suggest using the 1.8ohm coil with NS mark only with Nautilus AIO device. The Nautilus 0.7ohm coil cannot be used with Nautilus AIO.
While charging or when you press the fire button, the LED will indicate the Nautilus AIO’s current battery level: 3.5 volts or less = orange light; 3.5 to 3.8 volts = blue light; 3.8 volts and above = both blue and orange lights.