Please try updating the firmware of your Puxos mod, here is the link to download the firmware file: https://www.aspirecig.com/upgrade/puxos/537.html
We suggest using a wall adaptor with an output of 5V/2A
Yes, the coil of Cleito Pro is interchangeable with the coil of Cleito and Cleito EXO except for the 0.16ohm coil of Cleito EXO cannot fit in the 2ml Cleito pro tank, cause the size of the 0.16ohm coil too big.
1)Pull to remove/raise the top metal ring 2)Add your e-juice through the top side filling slot. 3)Replace the top metal ring (push the metal ring down firmly) The dot mark is where the filling hole is located, to avoid leakage, make sure the dot mark is facing upwards when removing/raising the top metal ring.
1) Unscrew to remove the drip tip. 2) Pull to remove the top hardware. 3) Unscrew and detach the used coil. 4) Screw a new coil into the base hardware. 5) Attach the top hardware and drip tip back to the tank.
You can install a high discharge rate 18650 battery cell using the with battery adaptor, you can also use 21700 or 20700 battery cells. We strongly recommend that you use a battery that has a discharge rate of higher than 30A, a 21700 is the best battery option.
Yes, it comes with one 21700 battery.
Using an 18650 battery, the mod can deliver up to 80W, when you use 21700 or 20700 battery, the mod can deliver up to 100W.
If you use an 18650 battery, you need to select the 18650 value that is displayed on the mod. If you install a 20700 or a 21700 battery, you need to select 21700 on the display.
The preset continuous fire time is 10 seconds. When you hold down the fire button for over 10 seconds, the screen will display “over 10S”. Press the up or down button to adjust continuous fire time. You can adjust from 1 second to 15 seconds. The display will then return to the working interface automatically […]