Q&A

Yes, While the mod is in TC mode, pressing up and down buttons simultaneously to enter or exit PWR and TCR settings. Pressing fire button to select between PWR and TCR, up and down button to change numbers, PWR numbers can be adjusted from 1W to 200W, while TCR range is from 0.10 to 9.99.

Press fire button and up button simultaneously will allow you to select between Wattage, Voltage, Bypass, CPS(C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). Pressing up or down button to select modes, fire button to select/confirm.

Pressing fire button and down button simultaneously to either lock or unlock keys

When the mod is on, pressing the fire button 3 times quickly to put the mod into or out of stealth mode.

Click the fire button 5 times rapidly to lock or unlock your mod.

The mod will automatically turn on after installing battery. Click the fire button 5 times rapidly to turn your speeder on. When the mod is locked, Pressing the fire button for 3 seconds to turn it off.

No, batteries can not be replaced while charging. Please unplug the USB cable before changing your batteries.

The pre-set contiuous fire time is 10S, pressing the fire button for 10 seconds to adjust the continuous fire time from 5S to 15S. Click Up and Down button to select numbers, fire button to confirm.

Download the driver software from Aspire website: http://www.aspirecig.com/upgrade/ Connect the Speeder to your PC. The driver will detect your mod automatically. Click “OpenFile” to choose the correct firmware file. Click “Update” to upgrade your mod. If it failed during the update process please repeat step 3 to step 4.

When the mod detects the USB charge voltage is less than 4.3V, it will stop charging and the screen will display “CHECK CHARGER”. For safe charging, we suggest using the provided Aspire USB charger to charge your mod.