It is possible to use Nicotine salt with 1.2ohm coil, but it is not recommended with 0.4ohm coil.
For 1.2ohm coil, you can fire it at 10-12W, and at 23-28W for the 0.4ohm coil.
1) Unscrew to remove the top hardware 2) Detach the used glass tube with the base hardware 3) Put a new glass tube into place 4) Screw the top hardware into place It is different when changing the glass tank of Standard version and TPD version. For TPD version, which is child-resistant, you will […]
The Tigon tank has a pre-installed 0.4ohm coil for light direct to lung vape experience. There is an extra 1.2ohm coil in the packing box for mouth to lung vaping.
1) Pull the top cap up, place your thumb on the top cap on the droplet symbol 2) Push the top cap away until the filling hole is revealed 3) Add your preferred e-liquid by pushing the tip of your filling bottle through the larger hole in the silicon leak resistant seal. 4) Slide the […]
Tigon is an animal which is offspring of a male tiger and a female lion. It means 2 great properties in 1 thing. As the Tigon tank has 2 different drip tips, 2 different coils and 2 different airflow control systems. So we called the tank Tigon.
Please use the 5V/2A output wall adaptor.
The Tigon coils material is Nichrome.
The mod will be full charged in 1-1.5 hours.
When the device is on press the fire button, the LED light will indicate your device’s current charge. When its current charge capacity is above 3.8 volts the indicator light will be blue and red. When the charge is between 3.8 and 3.5 volts the light will be blue only. When the charge drops below […]