Vrod 200

Open the battery door and insert 2 batteries into the battery compartment, please mind positive and negative poles when installing your batteries. Do not use wearing batteries.

The Vrod mod is compatible with dual 18650 batteries. The mod does not include battery cells, you need to purchase them separately.

For Standard version tank:   Unscrew and remove the top cap;  Pull down the airflow control ring (see highlighted part in below picture), the used coil will automatically pop up. Push in a new coil in place; Screw the top cap back. For Child-proof version tank: Press and unscrew to remove the top cap;  Pull down the airflow control ring (highlighted […]

For Standard version tank:   Unscrew to remove the top cap; Add your preferred e-liquid into the tank through the filling hole; Screw the top cap back. For Child-proof version tank: Press and unscrew to remove the top cap; Add your preferred e-liquid into the tank through the filling hole; Press and screw the top cap back. […]

Unscrew to remove the top hardware;  Change the old tank tube with a new one;  Screw the top hardware back into place. Note: The picture below is for tank with 4 ml glass tube.

Press fire button and “+” button simultaneously to enter the main menu interface, the screen will display “MODE”, “COLOR”, “BRIGHTNESS” and “EXIT”, Press “+” or “-” button to choose “BRIGHTNESS”, and then press the fire button to enter the “Brightness” setting; Press “+” or “-” button to adjust the screen’s brightness, then press the fire button to confirm and exit.

No, if you press the fire button while charging, the battery will stop charging to ensure safety.

Press the fire button and “-” button simultaneously to clean the puff counter.

The output power of Vrod 200 mod can be adjusted from 1 to 200 watts. 

Charge the Vrod 200 mod through the Type-C port, the maximum charging current is 2 A.