1. Pull and remove the build deck from the pod;
  2. Put the prebuilt coil on the build deck correctly;
  3. Screw the grub screws down with a screwdriver to tighten the

coil. Snip off the coil leads. Preheat the coil at a low wattage;

  •  Insert cotton through the coil. Align the 2 cotton leads into

the cotton groove;

  • Put the deck back into the pod.

Note: The Qbix RBA deck can be built with a single coil.         Prebuilt coil and cotton are not included in the package.