Press the fire button while installing a battery cell, the screen of Puxos mod will display battery options, the Aspire logo and then display EN and CH options, press the up or down button to choose EN, which is English, or choose CH, which is Chinese, then press the fire button to confirm.
Articles Tagged: aspire
How to change coil for Breeze 2?
1) Pull and remove the drip tip section. 2) Unscrew and pull out the chimney unit. 3) Detach the coil from the airflow control ring and replace it with new one. 4) Screw the chimney unit back to the pod system. 5) Replace the drip tip section.
How to fill the Breeze 2 with e liquid ?
Squeeze the pod release buttons on each side of the device to release and remove the pod Invert the pod and lift the silicone seal. Place the filling bottle/dropper into the pod filling hole. Squeeze the bottle/dropper bulb to add your e juice into pod system Replace the silicone seal firmly Re-insert the pod into […]
Does the Feedlink Squonker mod have protective features?
Yes it has. 1)Automatic cutoff: The continuous fire time is 10 seconds ,after 10 seconds of continuous firing the mod will stop firing and the LED light under the fire button will flash 10 times. 2)Short circuit protection: When the mod detects a short, the LED light will flash 4 times 3)Over discharge protection: When […]
How to lock or unlock the Feedlink Squonker mod?
Click the fire button 5 times rapidly to lock or unlock the device the LED light will flash blue and orange light 3 times to indicate lock or unlock. Note: When you put the mod in your pocket or bag, please remember to lock the mod first.
Can i use Revvo ARC coil into the Revvo boost tank?
No, Revvo boost tank can only work with Revvo boost coil.
How can I know the battery level?
When the battery level is above 3.8V, the LED light will be blue only, when the battery level is between 3.5V and 3.8V, the light will be a mixed color of blue and orange; the orange light means the battery level is below 3.5V.
What’s the suggested resistance if I use other squonker tanks with your Feedlink mod?
With the Aspire Custom Mosfet, the resistance of your coil can not be lower than 0.1 Ohm. Any atomizer with above 0.1ohm build can be use on the Feedlink, as it only works in bypass mode, the chip will automatically adjust the power level.
Do I need to turn the tank upside down when first filling?
Yes, if it’s a new coil or the coil has become dry for any reason, it’s necessary to invert tank to saturate the coil before vaping.
What’s the e-liquid capacity of the silicone bottle?
It is 7ml.