Articles Tagged: aspire

Yes, the airflow can be adjusted with the Airflow Control Ring on the side of Breeze NXT.

Charge via the Micro USB port. Maximum charge current can reach up to 1A, we recommend to use the output 5V/1A wall adaptor. When the USB cable is attached, the LED light will flash red 3 times. While charging the LED will indicate the Breeze NXT’s current charge status: 3.5 volts or less = red […]

Yes, the Breeze NXT has all protective features that aspire is famous for. Automatic Cutoff: The preset continuous fire time is 8 seconds, after 8 seconds of continuous firing, the LED light will flash purple 10 times and the device will stop firing. Short Circuit Protection: When the device detects a short, it will stop […]

When the Breeze NXT is in use, the light will indicate your device’s current charge. When its current charge is above 3.8 volts, the LED light will be green. When the charge is between 3.5 and 3.8 volts, the light will be blue. When the charge drops mbelow 3.5 volts, the light will then turn […]

After filling e-liquid, pressing the fire button five times quickly will turn the device on or off. The LED light will flash white 3 times to indicate on or off. When the device is on, just inhale from the drip tip and it will auto fire. Additionally, you can also click the fire button to […]

1) Lift the silicone seal on the side of the pod; 2) Place the tip of filling bottle into the pod filling hole; 3) Squeeze the filling bottle to add your preferred e-liquid into the pod system; 4) Replace the silicone seal firmly.

1) Pull and remove the pod from the main body; 2) Invert the pod and pull out the used coil; 3) Put a new coil into the chamber; 4) Re-insert the pod into the power unit.  

Yes, either automatic draw or click to fire button can work for Breeze NXT.

No, the Breeze NXT coils are made specifically for the Breeze NXT and are NOT interchangeable with the Breeze or Breeze 2.