Q&A

The metal part of the tank is made of stainless steel; The tube is a PSU tube and the extra tube included in the box is made of stainless steel; The pre-installed drip tip is made of stainless steel, and the extra drip tip included in the box is made of POM.

Unfasten the hexagonal screw on the 510 connector with 2.0 mm Allen Key to loosen it; Unscrew the used tank tube off together with the bottom deck, replace it with a new one; Screw the new tank tube together with the bottom deck back to the tank; Fix the hexagonal screw on the 510 connector […]

1) Pull and remove the whole top cap; 2) Add the e-liquid into the tank via the side filling hole; 3) Put the top cap back onto the tank and push it.

Pull and remove the whole top cap; 2) Unfasten the hexagonal screws on the post holes with 1.5 mm Allen Key; 3) Building the coils and place the built coil on the build deck correctly; 4) Tighten the hexagonal screws with 1.5 mm Allen Key. Snip off the coil leads; Connect with mod to activate to test […]

Single coil.

Yes, you can replace it with other 810 drip tips . Moreover, after installing the 510 drip tip adaptor on the tank, you can also use other 510 drip tips on the market.

Standard version: 3.5 ml, TPD version: 2 ml.