0.7 ohm: 20-25W 1.8 ohm: 9-13W
1) Unscrew to remove the chimney; 2) Put the prebuilt coil on the build deck correctly; 3) Screw the grub screws down with Allen wrench to tighten the coil. Snip off the coil leads; 4) Insert cotton through the coil, push it down into the e-liquid deck corners with tweezers; 5) Place the chimney back onto the deck, then screw to […]
The Nautilus RBA deck can be built with a single coil.
For standard and TPD version: Press “+” and “-” button simultaneously for 2s to enter the output mode interface, then press “+” or “-” button to choose the mode (VV/VW/BYPASS). Finally, press fire button to confirm. For US version: Default setting: The default factory setting is set in AUTO mode. When the device is in AUTO mode, it will automatically […]
The main material of metal part is Aluminium alloy.
The net weight of Nautilus Prime device is 118g.
The Nautilus Prime pod is made of PCTG.
Pull and remove the pod; Pull out the coil component from the pod; Change the used coil with a new one; Push the coil component back to pod Insert/secure the pod.
The Nautilus Prime has a 2000 mAh battery capacity, the built-in battery is not replaceable.
Dimensions (including drip tip): 89.5*45*23 mm