How to build the Nautilus RBA deck?

1) Unscrew to remove the chimney; 2) Put the prebuilt coil on the build deck correctly; 3) Screw the grub screws down with Allen wrench to tighten the coil. Snip off the coil leads; 4) Insert cotton through the coil, push it down into the e-liquid deck corners with tweezers; 5) Place the chimney back onto the deck, then screw to […]

Read More

How to set output mode for Nautilus Prime?

For standard and TPD version: Press “+” and “-” button simultaneously for 2s to enter the output mode interface, then press  “+” or “-” button to choose the mode (VV/VW/BYPASS). Finally, press fire button to confirm. For US version: Default setting: The default factory setting is set in AUTO mode. When the device is in AUTO mode, it will automatically […]

Read More

How do I change the coil?

Pull and remove the pod; Pull out the coil component from the pod; Change the used coil with a new one; Push the coil component back to pod Insert/secure the pod.

Read More